The Chevron Civil/Structural Engineer will be a member of the Richmond Refinery Plant Support Designs Engineering Department, providing civil and structural designs support.

Responsibilities for this position may include but are not limited to:

  • Provide civil/structural engineering support for routine daily operation of process units within the refinery. Support requires collaboration and interpersonal skills necessary to partner with Operations, Maintenance and Technical functions within the global refining system.  
  • Provide civil/structural engineering support for facility-wide improvement initiatives that require collaboration and leadership skills necessary to partner with multiple stakeholders. 
  • Sphere of influence ranges from working with Operations personnel in the field on a specific piece of equipment to partnering with technical personnel at the Manufacturing level to improve Chevron performance, operation, reliability, and safety across all Chevron refineries. 
  • Provide active field support working with Operations and other technical teams to scope civil and structural repairs and troubleshoot issues in process plants. Field support requires climbing of ladders to elevated areas and potentially confined space entries. Solutions often include the development and selection of alternatives considering reliability, total cost of ownership, operability and HSE impacts. Support implementation of solutions through Routine Maintenance, Turnaround execution and project construction and startup.  
  • Develop and manage civil/structural plans for larger projects and to install or replace complex equipment.  
  • Develop purchase specifications for engineered civil/structural equipment ensuring that the equipment meets company and industry standards and manage the technical fabrication and factory acceptance testing requirements for procuring equipment.  
  • Provide guidance for technical inquiries, issue technical recommendations, provide equipment and system troubleshooting, improve civil/structural engineering tools and support the development and improvement of civil/structural engineering work processes.  
  • Perform and support various technical studies to improve plant safety, reliability, throughput and economics.  
  • Provide engineering analysis, consultation and project management for small and major capital projects. 
  • Provide mentorship and guidance to develop less-experienced engineers, partnering with them to resolve equipment and project related issues. 
  • Review and approve engineering work plans of varying complexity, size, and scope. 
  • Be a role model for the Chevron Way and Chevron’s safety culture.  

Required Qualifications:

  • Knowledge of onshore and fixed nearshore marine (wharf) facilities and structures, foundations, geotechnical engineering, roads, bridges, equipment transportation, lifting, and installation, seismic design considerations, earthwork (grading & paving), hydrology, and underground utility systems. 
  • Proven ability to:  
  • -Perform structural design and analysis of fixed onshore and marine systems in accordance with applicable Chevron, industry, state, and federal codes and standards  
  • -Perform engineering tasks on projects such as: establishing structural design basis; structural weight estimation; beam/column/frame design; construction, transport and installation validation. 
  • -Evaluate structural integrity of onshore structures, substructures, and their foundations.  Designs and executes modifications and repairs. 
  • -Review lift plans, and reviews or performs calculation for structural members, spreader bars, and padeyes.  Evaluates field conditions for lift operation. 
  • -Specify, purchase, support install and commission and troubleshoot of civil and structural systems in the field. 
  • General knowledge of geotechnical engineering, deep and shallow foundation systems, and structural engineering (design & repair of steel and concrete structures) 
  • Understanding of the California Building Code, the Process Industry Practices (PIP), and relevant industry codes (examples: AISC 7-16, ACI 318-19, AISC Steel Construction Manuel, etc.)   
  • Registered Professional Engineer in the State of California (Civil Engineering) 
  • An understanding of refinery (or similar complex processing facility) processes and equipment
  • Bachelor of Science in Civil or Structural Engineering required.  

Preferred Qualifications:
Operational Excellence  

  • Demonstrates behaviors that are aligned with the Chevron Way. Understands OE requirements specific to current role. Follows procedures, seeks understanding of hazards, and verifies necessary safeguards are in place and sufficient. Challenges norms and stops work when an unsafe condition or act may result in an undesirable event or if the task is unclear. Applies Human and Organizational Performance principles to minimize error-likely situations in the performance of their work. Understands reporting requirements for incidents, near misses and potential noncompliance and acts accordingly. 

Leadership  

  • Consistently demonstrates behaviors to focus on the work, Align and Inspire, Build Relationships, Deliver Results.  
  • Actively participate in or lead a cross functional team tasked with solving complex problems.  
  • Experience with developing and initiating work process improvements.  
  • Experience with technically and professionally mentoring and developing less-experienced engineers with projects, troubleshooting, and other work-related matters. 

Teamwork   

  • Interface effectively with Operators, Mechanics, Vendors, Contractors, Management and other parties to meet business objectives.  
  • Foster cooperation and collaboration among individuals in a work group. Help teams resolve conflicts constructively.  
  • Work with customers to set priorities and execute work with minimal direct supervision.  
  • Collaboratively work with multiple Refinery organizations (Health Safety and Environment, Engineering, Operations and Maintenance) to gain support and alignment.  
  • Strong team player (i.e., capable of building strong, productive and mutually beneficial working relationships with all stakeholders). 

Relocation Options:

Relocation may be considered within Chevron parameters.

International Considerations:

Expatriate assignments will not be considered.

Chevron regrets that it is unable to sponsor employment Visas or consider individuals on time-limited Visa status for this position.

Apply now

You May Also Like

SAP EWM

Hiring_SAP EWM_12+ months Rolling Position_Infosys. Location: PAN India 100% Remote. Payroll Company:…

Product Management Internship – Summer 2025

As a Qualcomm Product Management intern, you will assist in business operations by gathering…

Environmental Data Management Specialist-Hybrid-USA

As an Environmental Data Management Specialist, you’ll deliver complex technical solutions applying your…

Contract Senior Analyst

Key Responsibilities Support contract management teams across projects and accounts; work with…

Rapid Response Director, YouTube Trust and Safety

About the job As a Rapid Response Director, you are a critical…

Shofer Limousine

Career in Shofer Driver Start a Successful Career as Shofer Driver If…

𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 𝐓𝐫𝐚𝐢𝐧𝐞𝐞 𝐚𝐧𝐝 𝐌𝐚𝐧𝐚𝐠𝐞𝐫

𝐆𝐄𝐍𝐏𝐀𝐂𝐓 𝐈𝐒 𝐇𝐈𝐑𝐈𝐍𝐆 We are inviting applications at 𝐆𝐄𝐍𝐏𝐀𝐂𝐓 for the position of…

Incident Manager

Description The Georgia Department of Behavioral Health and Developmental Disabilities (DBHDD) is…